Additional Information

Additional Information
  • Home

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
  • Call us on 954-767-3342
  • My Account
  • Gift Certificates
DEDICATED MARINE SUPPLIES

Wired seeTouch® Designer with Raise/Lower Keypad and Infrared Receiver

Call For Pricing!

Wired seeTouch® Designer with Raise/Lower Keypad and Infrared Receiver

Call For Pricing!
SKU:
HQWD-W5BIR-XX
Weight:
1.00 LBS
Share

Product Description

Power 24 V 30 mA IEC PELV / NEC® Class 2
Typical Power Consumption 0.6 W; 1 Power Draw Unit (PDU) 
Test conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 24 V
Regulatory Approvals UL, cUL , NOM, FCC, IC, COFETEL
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
Communications Connects to QS wired device link on Homeworks® QS processor.
ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended 
Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored.
Mounting U.S. wallbox 3 ½ in (89 mm) deep, 2 ¼ in (57 mm) deep minimum, or low-voltage mounting bracket
Wiring Control wire must be 1 pair 18 AWG (1.0 mm2) IEC PELV / NEC® Class 2 for power and 1 pair 22 to 18 AWG (0.5 to 1.0 mm2) IEC PELV / NEC® Class 2 twisted/shielded for data 
Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf

Product Reviews

Find Similar Products by Category